Safety features of your vehicle
243
Seat
Cargo loading
Make sure the engine is off, the
shift lever or dial is in P (Park) posi
-
tion, and the parking brake is
securely applied whenever loading
or unloading cargo. Failure to take
these steps may allow the vehicle to
move if the shift lever or dial is inad
-
vertently moved to another posi
-
tion.
4th row seat
4th row occupants should always
remain in the centre of the seat
cushion so the occupants' heads are
protected by the headrest. If not,
the tailgate may hit the occupant's
head, which could cause injury.
Full flat seats (if equipped)
Only use the full flat seat mode
when the 4th row seats are com
-
pletely folded down.
1. Push the 3rd row seats (1)
toward the rear end of the vehicle
as far as possible.
2. Push the 2nd row seats (2) to the
front of the vehicle as far as pos
-
sible.
3. Remove the 2nd row seat head
-
rests (3).
4. Fully recline the 2nd row seat
-
backs (4).
Pull up the seatback adjustment
lever located on top of the 2nd, 3rd
row centre seats to recline.
䳜 Do not move the vehicle with a
passenger and any full flat seat.
䳜 Make sure any part of the body,
such as hand and foot, is well out
of the way whilst adjusting the
seatback recline angle.
To Next Page
Loading...
