Driving your vehicle
1126
Blind-Spot Collision-Avoidance Assist (BCA)
Settings after parking the vehicle
at a safe location.
䳜 If any other function's warning
message is displayed or audible
warning is generated, Blind-Spot
Collision-Avoidance Assist's warn
-
ing message may not be dis
-
played and audible warning may
not be generated.
䳜 You may not hear the warning
sound of Blind-Spot Collision-
Avoidance Assist if the surround
-
ing is noisy.
䳜 Blind-Spot Collision-Avoidance
Assist may not operate if the
driver applies the brake pedal to
avoid collision.
䳜 When Blind-Spot Collision-Avoid
-
ance Assist is operating, braking
control by the system will auto
-
matically cancel when the driver
excessively depresses the accel
-
erator pedal or control the steer
-
ing wheel.
䳜 During Blind-Spot Collision-Avoid
-
ance Assist operation, the vehicle
may stop suddenly injuring pas
-
sengers and shifting loose
objects. Always have the seat belt
on and keep it attention.
䳜 Even if there is a problem with
Blind-Spot Collision-Avoidance
Assist, the vehicle's basic braking
performance will operate nor
-
mally.
䳜 Blind-Spot Collision-Avoidance
Assist does not operate in all situ
-
ations or cannot avoid all colli
-
sions.
䳜 Blind-Spot Collision-Avoidance
Assist may warn the driver late or
may not warn the driver depend
-
ing on the road and driving condi
-
tions. Check around the vehicle to
prevent dangerous situation.
䳜 Driver is responsible for driving
the vehicle. Do not depend on
Blind-Spot Collision-Avoidance
Assist. Pay attention around the
vehicle and drive safety.
䳜 Never test Blind-Spot Collision-
Avoidance Assist on people,
objects. It may cause serious
injury or death.
䳜 The brake control may not oper
-
ate properly even if a warning
message is displayed on the clus
-
ter if ESC (Electronic Stability
Control) is in the following circum
-
stances.
- The ESC (Electronic Stability
Control) warning light is on
- ESC (Electronic Stability Con
-
trol) is engaged in a different
function