117
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
Blind-Spot Collision-Avoidance
Assist may not operate properly
when driving on a sloped road.
Blind-Spot Collision-Avoidance
Assist may not detect the vehicle
in the next lane or may incorrectly
detect the ground or structure.
Always pay attention to road and
driving conditions whilst driving on
a sloped road.
䳜 Driving where the heights of the
lanes are different
Blind-Spot Collision-Avoidance
Assist may not operate properly
when driving where the heights of
the lanes (underpass joining sec
-
tion, grade separated intersec
-
tions, etc.) are different. Blind-
Spot Collision-Avoidance Assist
may not detect the vehicle on a
road with different lane heights.
Always pay attention to road and
driving conditions whilst driving
where the heights of the lanes
are different.
䳜 When you are towing a trailer or
another vehicle, make sure that
you turn off Blind-Spot Collision-
Avoidance Assist. Control safety
may be reduced.
䳜 Blind-Spot Collision-Avoidance
Assist may not operate normally
if interfered by strong electro
-
magnetic waves.
䳜 Blind-Spot Collision-Avoidance
Assist may not operate for
approximately 15 seconds after
the vehicle is started, or the front
view camera or rear corner radars
are initialized.
To Next Page
