29
3
3
Safety features of your vehicle Seat
Installing the seat (2nd row seat
for 7, 8 seats)
1. Put the front anchor strikers
along the front anchors on the
floor.
2. Insert two front anchor strikers
into the front anchors.
3. Lift the rear portion of the seat
cushion then push down firmly to
lock the catches into the rear
anchors until an audible "click" is
heard.
4. Make sure the green mark on the
rear seat cushion frame is visible
and the catches are locked in
position by moving the seat for
-
ward and backward or lifting the
front portion of the seat. If the
green mark is invisible and the
seat moves, it is not locked prop
-
erly.
5. Pull up the seatback reclining
strap.
6. Lift and push the seatback back
-
ward firmly until it clicks into
place. Make sure the seatback is
locked in place.
7. Return the seat belt to the proper
position.
To Next Page
Loading...
