Driving your vehicle
1886
Rear Cross-Traffic Collision-Avoidance Warning
(RCCW)
䳜 To warn the driver of an
approaching vehicle from the rear
left/right side of your vehicle, the
warning light on the outside rear
-
view mirror will blink and a warn
-
ing will appear on the cluster. At
the same time, an audible warn
-
ing will sound. If the Rear View
Monitor is operating, a warning
will also appear on the infotain
-
ment system screen. (if equipped)
䳜 Rear Cross-Traffic Collision-
Avoidance Warning will operate
when all the following conditions
are satisfied:
- The gear is shifted to R
(Reverse) and the vehicle speed
is below 8 km/h (5 mph)
- The approaching vehicle is
within approximately 25 m (82
ft.) from the blind spot area of
your vehicle
- The speed of the vehicle
approaching from the blind spot
area is above 5 km/h (3 mph)
䳜 If the operating conditions are
satisfied, there will be a warning
whenever the vehicle approaches
from the blind spot area.
䳜 Depending on the instrument
cluster specifications or theme,
images or colours may be dis
-
played differently.
䳜 For your safety, set the Settings
after parking the vehicle at a safe
location.
䳜 If any other function's warning
message is displayed or audible
warning is generated, Rear Cross-
Traffic Collision-Avoidance Warn
-
ing's warning message may not
be displayed and audible warning
may not be generated.
䳜 You may not hear the warning
sound of Rear Cross-Traffic Colli
-
sion-Avoidance Warning if the
surrounding is noisy. Adjust the
volume inside the vehicle appro
-
priately be aware of the sur
-
roundings and drive safely.
䳜 Rear Cross-Traffic Collision-
Avoidance Warning does not
operate in all situations or cannot
avoid all collisions.
䳜 The driver should hold the
responsibility to control the vehi
-
cle. Do not solely depend on Rear
Cross-Traffic Collision-Avoidance
To Next Page
