33
3
3
Safety features of your vehicle Seat
To use the rear seat:
1. Lift the seat by pulling up the
stowing lever.
2. Release the lever and push the
seat forward firmly until it clicks
into place to insert the catches
into the anchors.
3. Make sure the catches are locked
in position by moving the seat
forward and backward or lifting
the front portion of the seat. If
the seat moves, it is not locked
properly. Do not push down the
upper part of the seatback when
pushing the seat forward. Doing
so can prevent the catches from
being locked in position.
4. Pull out and hold the folding strap.
5. Hold the seat back when you
adjust the seat back angle until it
clicks into place and then release
the folding strap. Make sure the
seatback is locked in place.
To Next Page
Loading...
