195
6
6
Driving your vehicle Rear Cross-Traffic Collision-Avoidance Assist
(RCCA)
If the engine is restarted, Warning
Timing and Warning Volume will
maintain the last setting.
Warning Timing
With the engine on, select 'Setting
→ Driver Assistance → Warning
Timing' to change the Settings for
Rear Cross-Traffic Collision-Avoid
-
ance Assist. You can set the warning
point to 'Normal' or 'Late'.
䳜 Normal: Use in a typical driving
environment. Select 'Late' if the
Warning Timing feels too sensi
-
tive.
If you change the Warning Timing,
the warning time of other Driver
Assistance systems may change.
Warning Volume
To change the warning volume, With
the engine on, select Infotainment
system 'Setting → Driver Assistance
→ Warning volume' from the Set
-
tings menu to change the Warning
Volume to 'High', 'Medium' or 'Low'
for Rear Cross-Traffic Collision-
Avoidance Assist.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Rear Collision-
Avoidance Assist.
䳜 Even though 'Normal' is selected
for Warning Timing, if the vehicles
from the blind spot area
approaches at high speed, the ini
-
To Next Page
