51
7
7
What to do in an emergency ERA-GLONASS Emergency Call
Manual accident reporting
1. Pressing the SOS button
2. Connection with the single duty
dispatch service
3. Emergency services
Driver or passenger manually can
make an emergency call in the single
duty dispatch service, by pressing
SOS button to call the necessary
emergency services.
A call to the emergency services
through the ERA-GLONASS system
can be cancelled by pressing the SOS
button again only before the call
connection.
After activation of emergency call in
the manual mode (for proper emer
-
gency services and support), the
ERA-GLONASS system automati
-
cally transmits the road accident
data / or data on other accident to
the officer of the single duty dis
-
patch service (during emergency
call) by pressing the SOS button.
In case of road accident or other
accident for activation of emer
-
gency call in manual mode it is nec
-
essary:
1. Stop a car, after which in accor
-
dance with traffic rules to ensure
safety to yourself and other par
-
ticipants of road traffic;
2. Press the SOS button, when
pressing the button SOS registra
-
tion of the device in the wireless
telephonic communication net
-
works is carried out, minimum
data set about car and its location
is collected in accordance with of
the technical requirements of the
device. After that connection with
the officer of the ERA-GLONASS
system is made for clearing up
reasons (conditions) of the emer
-
gency call.
3. After clearing up reasons of the
emergency call, the officer of the
single duty dispatch service sends
minimum data set to emergency
services and completes the emer
-
gency call.
If the emergency call is not carried
out in accordance with the proce
-
dure, mentioned above, the emer
-
gency call will be considered as
erroneous.
To Next Page
