65
8
8
Maintenance Fuses
When the blade type fuse is dis
-
connected, remove it by using the
clip designed for changing fuses
located in the engine room fuse
box. Upon removal, securely
insert reserve fuse of equal quan
-
tity.
3. Check the removed fuse; replace it
if it is blown. To remove or insert
the fuse, use the fuse puller in the
engine compartment fuse panel.
4. Push in a new fuse of the same
rating, and make sure it fits
tightly in the clips. If it fits loosely,
consult a professional workshop.
Kia recommends to consult an
authorised Kia dealer/service
partner.
After checking the fuse panel in the
engine compartment, securely
install the fuse panel cover through
the audible clicking sound.
If not, electrical failures may occur
from water contact.
Main fuse (Multi fuse)
If the main fuse is blown, it must be
removed as follows:
1. Turn off the engine.
2. Disconnect the negative battery
cable.
3. Remove the nuts shown in the
picture above.
4. Replace the fuse with a new one
of the same rating.
5. Reinstall in the reverse order of
removal.
If the multi fuse is blown, consult a
professional workshop. Kia recom
-
mends to consult an authorised Kia
dealer/service partner.
To Next Page
Loading...
