EasyManua.ls Logo

Kia XCeed 2020 - Stop and Tail Lamp (Bulb Type) Bulb Replacement - Rear Combination Lamp for 5 Door (Type A), Wagon (Type A)

Kia XCeed 2020
725 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Light bulbs
8
102
Stop and tail lamp (Bulb type) bulb
replacement - Rear combination
lamp for 5 Door (type A), Wagon
(type A)
OCDW079053
1.Openthetailgate.
2.Opentheservicecover.
3.Loosenthelightassembly
retainingscrewswithacross-tip
screwdriver.
OCDW079054
4.Removetherearcombination
lampassemblyfromthebodyof
thevehicle.
5.Disconnecttherearcombination
lampconnector.
TypeA
OCDW079056
TypeC
OCDW079094
6.Removethesocketfromthe
assemblybyturningthesocket
counterclockwiseuntilthetabson
thesocketalignwiththeslotson
theassembly.
7.Removethebulbfromthesocket
bypressingitinandrotatingit
counterclockwiseuntilthetabson
thebulbalignwiththeslotsinthe
socket.
Pullthebulboutofthesocket.
8.Insertanewbulbbyinsertingit
intothesocketandrotatingit
untilitlocksintoplace.

Table of Contents

Related product manuals