KidKraft Cedar Summit DEVONSHIRE ELITE - Page 22

22
2 x Balluster 5/8 x 2-1/2 x 36-29/32”
1 x Balluster 5/8 x 2-1/2 x 36-29/32”
Wood Parts
9373
9374
x 22
Hardware
S30
22 x #8 x 1-1/16” Wood Screw
A
B
C
D
E
S30
S30
S30
9373
9374
9373
9372
9363
L: In the center notches of (9367) Narrow Mid Cross Front and (9451) Cross Support Middle Short place (9374)
Baluster making sure that the bolt hole is at the top. Attach using 4 (S30) #8 x 1-1/16” Wood Screws. (g 2.9 and
2.10)
M: Place 1 (9373) Baluster in each of the outside notches and attach using 4 (S30) #8 x 1- 1/16” Wood Screws
per board. (g. 2.9)
N: Check to ensure that the assembly is square, then install 10 (S30) #8 x 1- 1/16” Wood Screws into the
locations shown in g.2.9 securing the (9367) Narrow Mid Cross Front, (9451) Cross Support Middle Short and
the (9372) Cross Frame. (g. 2.9 and 2.11)
O: Tighten all bolts.
Step 2: Front Wall Assembly
Part 4
9367
Fig. 2.9
Fig. 2.10
Fig. 2.11
9451