KidKraft Cedar Summit DEVONSHIRE ELITE - Page 64

64
Step 24: Attach Wall Supports
Wood Parts
2 x Wall Support 1-1/2 x 1-1/2 x 55-1/2”
9118
Hardware
14 x #8 x 2-1/2” Wood Screw
S3
Fig. 24.1
Fig. 24.2
S3
S3
9118
9118
9118
Note: It is important to note hole orientation for this step.
A: Tight to the oor boards and tight in each corner of the (9213) SW Wall Panel attach 2 (9118) Wall Supports
using 7 (S3) #8 x 2-1/2” Wood Screws per support. (g. 24.1 and 24.2)
9213
(Tower assembly hidden for clarity.)