M0312-01Model 3605
1-4 07/20
General Information
The Model 3605 Twin-Line Planter is available with vacuum or mechanical meters, conventional hoppers or bulk fill,
Split Rows, and various other options. Liquid or dry fertilizer application equipment and various row unit attachments
are also available.
Information used in these instructions was current at time of printing. However, due to Kinze’s ongoing product
improvement, production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing,
Inc. reserves the right to change specifications or design without notice and without incurring obligation to install the
same on machines previously manufactured.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing direction machine
travels in use unless otherwise stated.
TOOLS REQUIRED
Hardware Size / Tool Required
/" = /" /" = /"
(nut for /" hardware uses /" tool)
/" = 1/" 1/" = 1/"
/" = /" /" = /" /" = 1/" 1/" = 2/"
/" = /" /" = /" 1" = 1/"
To Next Page
Loading...
