M0312-01Model 3605
3-28 07/20
Row Unit Operation
Row Unit Spiked Closing Wheel
1"-1¼"
SPIKED CLOSING WHEEL
Spiked closing wheels crumble the sidewall, allowing roots
to pentrate soil. They can be used on pull row units and push
row units.
Align spiked closing wheels straight across from each other,
in most rearward holes on closing wheel arm. Set the wheels
1" - 1¼"
(~2,5 - 3,1 cm)
apart at the closest point. If large
amounts of contouring is being done, mount wheels in the
forward most hole. This will reduce drifting of row unit.
To Next Page
Loading...
