Kinze 3605 - Oil Specification

M0312-01Model 3605
2-8 07/20
Machine Operation
OIL SPECIFICATION
Oil used in the planter and PTO chemical properties:
Viscosity, mm2/s @ 100 ºC. ASTM
D-445
10,0
Viscosity, mm2/s @ 40 ºC. ASTM
D-445
63,0
Viscosity Index ASTM D-2270 143,00
TBN, mg KOH/g ASTM D-2896 9,0
TAN, mg KOH/g (ASTM D-664) 2,0
Pour Point, ºC ASTM D-5950 -42,0
Specific Gravity @ 15.6°C. ASTM
D-4052
0,876
Flash Point, COC, ºC. ASTM D-92 220
6. Connect ASABE Standards 7 terminal connector for safety/warning lights on planter to ASABE Standards
receptacle on tractor. If your tractor is not equipped with an ASABE Standards receptacle, check with your tractor
manufacturer for availability. Check warning lights on planter work in conjunction with warning lights on tractor.
NOTE: A 12 volt battery connection is required to power the vacuum fan digital gauge. Connect “red” wire to
positive (+) battery terminal and “black” wire to negative (-) battery terminal.
7. Raise jack stand and remount horizontally on storage bracket.
Remove and store jack
NOTE: Factory lled with VALVOLINE
TM
UNITRAC SAE 80W.