Model 3605M0312-01
07/20 3-21
Row Unit Operation
ADDITIVES
Rapeseed
It is essential to use graphite to neutralize electrostatic rapeseed
properties.
Mix rapeseed with Kinze graphite thoroughly in a closed
container. Keep mixing until all seed becomes evenly coated.
Excessive graphite will stay on the bottom of container. It is
recommended to prepare an even amount of seed-graphite mix
for each hopper separately. This will help to monitor each row
performance while planting.
Use approximately 1Tbs (15ml) of graphite per 3-4L of seed.
NOTE: For best performance Kinze brand graphite MUST be
used.
RATE CHARTS
For Rapeseed Rate Charts, See "Rate Charts" on page 5-1 section of this manual.
To Next Page
Loading...
