WiFi Security
Path: Settings > System > WiFi Security
This menu item will not be visible if the system detects an Ethernet connection.
Your WiFi network password (WEP/WPA key) can be obtained from the software provided with your
wireless access point. You will have either a WEP key or a WPA key, not both. Your network may also be
configured without a WEP/WPA key; in this case select OFF when prompted to select a key type. “OFF” is
the default for each detected server.
From the Main Menu scroll to “Settings.”
Press the [OK Icon] to select.
Using the dial, scroll to and select “System.”
Press the [OK Icon] to select.
Scroll to “WiFi Security.”
Press the [OK Icon] to select. All detected servers will be listed.
Scroll to the server that you want to access.
Press the [OK Icon] to select.
Scroll to and select “OFF,” ”WEP Key,” or “WPA Key.”
Use the dial to scroll to the first digit in the code.
Press the [OK Icon] to set the selected number and proceed to the next digit.
Repeat for all digits of the code.
Once the last digit of the code is selected, press and hold the [OK Icon] for 2 seconds to set.
If a valid WEP/WPA key has been entered, you will return to the server selection screen. If an invalid key is
entered, the screen will be cleared allowing you to re-enter the key.
1079815-5-A 100 Kohler Co.
To Next Page
Loading...
Need help?
General
