Changing Temperature Therapy Temperatures
Path: Shower > Temperature > [Back Icon] Options > °F Therapy
NOTE: If the [No Icon] is present following ″°F Therapy″ instead of an arrow, the massage function is not
yet activated. Refer to the ″Activate Temperature Therapy″ section to turn ON this function.
This function, when activated, causes the water temperature to cycle from hot to cold to hot or cold to hot to
cold dependent on your chosen therapy. High, mid, and low temperatures can be customized.
To customize the temperature therapy temperatures, you must first activate a hot or cold therapy.
To turn ON the temperature therapy function, from the temperature screen press the [Back Icon].
Using the dial, scroll to “°F Therapy.”
Press the [OK Icon] to select.
Using the dial, scroll to either “Begin Hot” for heat therapy, or “Begin Cold” for cold therapy.
Press the [OK Icon] to select and begin your selected temperature therapy.
You will see a temperature screen with the various temperature jumps along the bottom. The beginning
therapy temperature will be highlighted in the bottom left of the screen.
Use the dial to adjust the temperature as desired.
Press the [OK Icon] to set this first temperature and advance to the next temperature.
Repeat for each temperature setting.
NOTE: When adjusting the temperatures, the second and fourth temperature settings will always be the
same; if you adjust one temperature the other will automatically update to the new setting.
Temperature Therapy Not Activated
Temperature Therapy Active
Refer to the "Activate
Temperature Therapy"
section.
Hot Therapy
Cold Therapy
Kohler Co. 13 1079815-5-A