Kohler K-657 User Manual

Temperature Therapy Options
Path: Shower > Temperature > [Back Icon] Options > °F Therapy
NOTE: If the [No Icon] is present following “°F Therapy” instead of an arrow, the temperature therapy
function is not yet activated. Refer to the “Activate Temperature Therapy” section to turn on this
function.
This function, when activated, causes the water temperature to cycle from hot to cold to hot or cold to hot to
cold dependent on your chosen therapy.
NOTE: Temperatures can be customized as desired. For the explanation of the therapies, the default
temperatures will be used.
Hot Therapy will start with a water temperature of 101°F (38°C) for 90 seconds, decrease to 96°F (36°C) for
45 seconds, decrease again to 86°F (30°C) for 30 seconds, then step the temperature back up to 96°F (36°C)
for 45 seconds before going back to 101°F (38°C). The water temperature will continue to cycle until this
function is turned OFF.
Cold Therapy will start with a water temperature of 86°F (30°C) for 30 seconds, increase to 96°F (36°C) for
45 seconds, increase again to 101°F (38°C) for 90 seconds, then step the temperature back down to 96°F
(36°C) for 45 seconds before going back to 86°F (30°C). The water temperature will continue to cycle until
this function is turned OFF.
To turn ON the temperature therapy function, from the temperature screen press the [Back Icon].
Using the dial, scroll to “°F Therapy.”
Press the [OK Icon] to select.
Using the dial, scroll to either “Begin Hot” for heat therapy, or “Begin Cold” for cold therapy.
Press the [OK Icon] to select and begin your selected temperature therapy.
Temperature Therapy Not Activated
Temperature Therapy Active
Refer to the "Activate
Temperature Therapy"
section.
Hot Therapy
Cold Therapy
Kohler Co. 11 1079815-5-A

Kohler K-657 Specifications

General

Brand	Kohler
Model	K-657
Category	Recording Equipment
Language	English