Using Your Shower
IMPORTANT! The interface must be set up according to your chosen valve configurations before
proceeding. If the configuration has not yet been selected in your interface, refer to the ″Set the Valve
Configuration - Preset Options″ or ″Set the Valve Configuration - Custom Options″ section.
To begin using your shower, use the dial to scroll to the shower screen.
Press the [OK Icon] to select and turn on your shower.
If your user presets are already set, refer to the “Using User Presets” section.
At any time, the shower can be turned OFF by pressing the [Power Icon].
The water will turn on and you will see a temperature screen displaying the current temperature and the set
temperature.
If you have the auto purge function activated: All the water outlets (with the exception of any
handshowers) will turn on and remain on until the set temperature is reached. (See the “Auto Purge” section
for instructions to turn this feature ON or OFF.)
Once the set temperature is reached all outlets except the designated primary showerhead will turn off. (See
the “Select Primary Water Outlet” section for more information on selecting or changing your primary water
outlet.)
If the auto purge function is not activated: The primary water outlet, usually a single showerhead, will turn
on. (See the “Select Primary Water Outlet” section for more information on selecting or changing your
primary water outlet.)
Use the dial to adjust the temperature up or down as desired.
In addition to the primary showerhead, you can also turn individual water outlets ON or OFF. Refer to the
“Turn Water Outlets ON or OFF” section.
The shower mode options consist of:
•
All On – turns all water outlets ON or OFF
•
List of Water Outlets – turns specific water outlets ON or OFF
•
Massage – selects massage cycling pattern
•
°F Therapy – selects hot and cold therapy options
•
Lights – turns incandescent and/or chroma lights ON or OFF also allows adjustment of color
(chroma only) and brightness (This menu item is only visible if this component is connected.) Refer
to the “Using Lights” section.
•
Music – allows for the selection of music from a music server, internet radio, or other audio device
connected via the “Line In” jack. Refer to the “Using Music” section.
1079815-5-A 6 Kohler Co.
To Next Page
Loading...
Need help?
General
