Choose Massage Function
Path: Shower > Temperature > [Back Icon] Options > Massage
This function, when activated, causes the water outlets to cycle ON and OFF in the chosen massage pattern.
NOTE: If the [No Icon] is present following “Massage” instead of an arrow, the massage function is not
yet activated. Refer to the “Activate the Massage Function” in the setting section in this guide to turn on
this function.
NOTE: The available massage cycling options vary dependent on your chosen configuration. For more
information about the available cycling patterns, refer to the section for your particular configuration in
the “Configurations” section of this guide.
To turn ON the massage function, from the temperature screen press the [Back Icon].
Using the dial, scroll to “Massage.”
Press the [OK Icon] to select
Using the dial, scroll to and highlight your desired massage.
Press the [OK Icon] to select and begin massage.
Press the [Back Icon] twice to return to the temperature screen.
Once a massage mode is selected, the body sprays/watertiles will automatically turn on and the water
outlets will begin to cycle ON and OFF in your chosen massage pattern.
Massage Not Activated
Massage Active
Refer to the "Activate the Massage
Functions" section.
Kohler Co. 9 1079815-5-A