Auto Purge
Path: Settings > Shower > Auto Purge
The auto purge function is defaulted to “07 seconds.”
This function turns on all water outlets, except any handshowers, to purge the cold water from the shower
lines and reach the set temperature faster. Once the auto purge has run for the set amount of time, the user
preset will determine which outlets remain on.
The auto purge function will only activate if the shower has been inactive for 30 minutes or longer.
From the Main Menu scroll to “Settings.”
Press the [OK Icon] to select.
Using the dial, scroll to and select “Shower.”
Press the [OK Icon] to select.
Scroll to “Auto Purge.”
Press the [OK Icon] to select.
Scroll to either 07 seconds, 15 seconds, 30 seconds, 45 seconds, 60 seconds or “OFF.”
Press the [OK Icon] to select. Your selection will be “checked” and the auto purge function will be
activated.
Press the [Back Icon] to return to the Shower Settings screen.
Kohler Co. 63 1079815-5-A
To Next Page
