CP3003-SA Installation
ID 1052-6929, Rev. 3.0 Page 3 - 17
D R A F T — F O R I N T E R N A L U S E O N L Y
3.6 Software Installation
The installation of the Ethernet and all other onboard peripheral drivers is described in detail in
the relevant Driver Kit files.
Installation of an operating system is a function of the OS software and is not addressed in this
manual. Please refer to the appropriate OS software documentation for installation.
Note ...
Users working with pre-configured operating system installation images for
Plug and Play compliant operating systems, for example Windows®, must take
into consideration that the stepping and revision ID of the chipset and/or other
onboard PCI devices may change. Thus, a re-configuration of the operating
system installation image deployed for a previous chipset stepping or revision
ID is in most cases required. The corresponding operating system will detect
new devices according to the Plug and Play configuration rules.
To Next Page
Loading...
