Korg M50-88 - Page 177

SEQ P7: ARP/DT (Arpeggiator/DrumTrack) 7–1: ARP Setup T01–08, 7–2: ARP Setup T09–16
169
Example 1)
On tracks 1 and 2, set MIDI Channel (Seq 3–1(2)c) to 01 and
Status (Seq 3–1(2)c) to INT. Assign arpeggiator A to track 1
and arpeggiator B to track 2, and check Arpeggiator Run A,
B. In Track Select, choose Track01.
With the ARP ON/OFF switch off, play the keyboard and
tracks 1 and 2 will sound simultaneously.
When you turn on the ARP ON/OFF switch and play the
keyboard, arpeggiator A will operate for track 1 and
arpeggiator B will operate for track 2.
Example 2)
For tracks 1, 2 and 3, set the MIDI Channel (Seq 3–1(2)c) to
01, 02, and 03 respectively, and set Status (Seq 3–1(2)c) to
INT. Assign arpeggiator A to tracks 1 and 2, and arpeggiator
B to track 3. Check the Arpeggiator Run A, B setting.
• In Track Select, choose Track01.
Playing the keyboard when the ARP ON/OFF switch is
off will play the sound assigned to track 1.
Playing the keyboard when the ARP ON/OFF switch is
on will cause arpeggiator A to operate for tracks 1 and 2,
and produce sound for both tracks.
• In Track Select, choose Track02.
Playing the keyboard when the ARP ON/OFF switch is
off will play the sound assigned to track 2.
Playing the keyboard when the ARP ON/OFF switch is
on will cause arpeggiator A to operate for tracks 1 and 2,
and produce sound for both tracks.
• In Track Select, choose Track03.
Playing the keyboard when the ARP ON/OFF switch is
off will play the sound assigned to track 3.
Playing the keyboard when the ARP ON/OFF switch is
on will cause arpeggiator B to operate for track 3, and
play the sound assigned to track 3.
•Alternatively, you could choose Track01 in Track Select
to run arpeggiator A for tracks 1 and 2, and use an
external MIDI device connected to the M50’s MIDI IN to
send note data to MIDI channel 3 to play arpeggiator B.
The arpeggiator cannot be triggered by the notes
played by the sequencer.
If the track Status (Seq 3–1(2)c) is set to INT or BTH,
tracks 1–16 to which arpeggiator A or B are assigned
will be sounded by the note data generated by the
arpeggiator, regardless of the MIDI Channel (Seq 3–
1(2)c) setting of that track. If the track “Status” is set to
BTH, EXT, or EX2, the track will transmit MIDI note
data on the MIDI Channel of that track.
In this case, arpeggiator A or B will be triggered by the
MIDI Channel of any track 1–16 to which the
corresponding arpeggiator is assigned.
If the Local Control On (Global P1: 1–1a) is turned OFF,
the arpeggiator will not be triggered by note data from
the keyboard. It will be triggered by note data received
at MIDI IN. If you wish to record just the trigger notes
on an external sequencer and run the M50’s arpeggiator
in this way, turn Local Control OFF.
If you want the note data generated by the arpeggiator
to be recorded on the external sequencer, turn Local
Control ON, and turn off the echo back function of the
external sequencer. (☞p.400)
Arpeggiator Run A, B [Off, On]
When the ARP ON/OFF switch is on, the arpeggiator(s) that
are checked here will function for the track(s) to which they
are assigned by Arpeggiator Assign.
When the arpeggiator is on, A and B can be turned on/off
independently.
▼7–1(2): Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
• 2: Rename Song ☞p.191
• 3: Delete Song ☞p.191
• 4: Copy From Song ☞p.191
• 5: Load Template Song ☞p.191
• 6: Save Template Song (Save as User Template
Song) ☞p.192
• 7: FF/REW Speed ☞p.192
• 8: FF/REW Speed ☞p.192
• 9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
• 12: Copy Arpeggiator ☞p.75
For more information, please see “Sequencer: Menu
Command” on page 191.
Track2 MIDI Ch=1ch Status=INT
Arpeggiator
A
Arpeggiator
B
Arpeggiator
Assign
A
B
Pattern - A
Pattern - B
Pattern - A
Pattern - B
Trigger
= Ch1
Trigger
= Ch1
Track1 MIDI Ch=1ch Status=INT
Pattern - B
Pattern - A
Pattern - A
Track2 MIDI Ch=2ch Status=INT
Arpeggiator
A
Arpeggiator
B
Arpeggiator
Assign
A
A
Pattern - A
Pattern - B
Trigger
= Ch1, Ch2
Trigger
= Ch3
Track3 MIDI Ch=3ch Status=INTB
Track1 MIDI Ch=1ch Status=INT