Effect Guide
372
170: Early Reflections
This early reflection effect has more precise early reflections
with twice the maximum length of a normal-size effect (see
p.336, 076: Early Reflections). You can create a very smooth
and dense sound.
aType
Sharp, Loose,
Modulated,
Reverse
Selects the decay curve for the
early reflection p.336
b
ER Time
[msec]
10...1600
Sets the time length of early
reflection
c
Pre Delay
[msec]
0...200
Sets the time taken from the
original sound to the first early
reflection
d EQ Trim 0...100
Sets the input level of EQ
applied to the effect sound
e
Pre LEQ Fc
Low,
Mid-Low
Selects the cutoff frequency
(low or mid-low) of the low-
range equalizer
Pre HEQ Fc
High,
Mid-High
Selects the cutoff frequency
(high or mid-high) of the high-
range equalizer
f
Pre LEQ Gain
[dB]
–15.0...+15.0 Sets the gain of Low EQ
Pre HEQ Gain
[dB]
–15.0...+15.0 Sets the gain of High EQ
g
Wet/Dry
Dry, 1 : 99...
99 : 1, Wet
Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount
for Wet/Dry
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
Pre Delay
Early Reflections
LEQ HEQ
To Next Page
Loading...
