Program mode
4
0–1c: Drum Track
The Drum Track provides an easy way for you to play back
a rhythm section using the M50’s high-quality drum
programs and a rich variety of drum patterns.
You can try out program phrases or edit programs while
listening to the drum track.
When you come up with a phrase you like, you can easily
record it into the sequencer using the Auto Song Setup
function.
Pattern Bank [Preset, User]
Pattern No. [P000...671, U000...999]
Select the pattern you want to use in the drum track. You can
create user patterns in Seq P10: Pattern/RPPR– Pattern Edit.
Drum Track Program [A...E: 000…127, GM,
g(1)...g(9), g(d): 001…128]
Select the program that will play the drum track pattern.
Note: You can also edit these parameters in P7: ARP/DT
(Arpeggiator/Drum Track)
The MIDI channel of the drum track is specified by the
Global P1: MIDI– MIDI Basic page DrumTrack Prog
MIDI Ch. MIDI message transmission for a pattern is
specified by Prog MIDI Out. Program changes are not
transmitted or received.
▼0–1: Menu Command
• 0: Write Program ☞p.73
For more information, please see “Program: Menu
Command” on page 73.
0–4: OSC/DrumTrk Mixer
0–4a: Program Select, Tempo
Bank (Bank Select)
[A...E, GM, g(1)...g(9), g(d)]
Program Select [A...E: 000…127, GM, g(1)...g(9),
g(d): 001...128]
This shows the bank, number, and name of the currently
selected program. Here you can also select a program. For
more information, please see “0–1a: Program Select” on
page 2.
(Tempo) [040.00...300.00, EXT]
For more information, please see “ (Tempo)” on page 3.
0–4b: OSC/DrumTrack Mixer
Here, you can adjust the volume and change the Play/Mute
and Solo On/Off settings of oscillators 1 and 2 and the drum
track.
OSC Play/Mute:
OSC1 Play/Mute [Play, Mute]
Play: Oscillator 1 will sound.
Mute: Oscillator 1 will be muted (silent).
OSC2 Play/Mute [Play, Mute]
Play: Oscillator 2 will sound.
Mute: Oscillator 2 will be muted (silent).
Note: OSC2 Play/Mute cannot be set for a program whose
Oscillator Mode is Single or Drums.
DRUM Play/Mute 1 [Play, Mute]
Play: The drum track will sound.
Mute: The drum track will be muted (silent).
OSC Solo:
OSC1 Solo [Off, On]
Switches the Solo status on/off for oscillator 1.
OSC2 Solo [Off, On]
Switches the Solo status on/off for oscillator 2.
DRUM Solo [Off, On]
Switches the Solo status on/off for the drum track.
Note: Solo applies to oscillators 1 and 2, the drum track.
Note: OSC2 Solo cannot be set for a program whose
Oscillator Mode is Single or Drums.
0–4a
0–4b
0–4
Menu
To Next Page
Loading...
Need help?
General
