SEQ P7: ARP/DT (Arpeggiator/DrumTrack) Synchronizing the Drum Track function
173
Sync [Off, On]
Off: The drum pattern will not synchronize to the currently-
running arpeggiator, but will start immediately.
On: The drum pattern will synchronize to the currently-
running arpeggiator.
Note: Use P7–3(4)c: Arpeggiator-A(B) Setup Key Sync to
specify whether arpeggiator will synchronize to the
currently-running drum pattern.
Latch [Off, On]
This is valid if Trigger Mode is Wait KBD Trig.
Off: If the DRUM TRACK ON/OFF switch is on (LED
blinking), the pattern will start when you play the keyboard
(note-on). The pattern will stop when you release the
keyboard (note-off).
On: If the DRUM TRACK ON/OFF switch is on (LED
blinking), the pattern will start when you play the keyboard
(note-on). The pattern will continue when you release the
keyboard (note-off). The pattern will stop when you turn the
DRUM TRACK ON/OFF switch off (LED dark).
Zone:
Keyboard
Bottom [C–1...G9]
Top [C–1...G9]
This is valid if Trigger Mode is set to Wait KBD Trig.
It specifies the range of keys that will start the drum pattern.
Velocity:
Bottom [001...127]
Top [001...127]
This is valid if Trigger Mode is set to Wait KBD Trig.
It specifies the range of velocities that will start the drum
pattern.
▼7–7: Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
•2: Rename Song ☞p.191
•3: Delete Song ☞p.191
•4: Copy From Song ☞p.191
•5: Load Template Song ☞p.191
•6: Save Template Song (Save as User Template
Song) ☞p.192
•7: FF/REW Speed ☞p.192
•8: Set Location (Set Location for Locate Key) ☞p.192
•9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
• 12: Copy Drum Track ☞p.74
• 13: Erase Drum Track Pattern ☞p.75
For more information, please see “Sequencer: Menu
Command” on page 191.
Synchronizing the Drum Track function
The Trigger “Sync” parameter
The trigger timing of a drum track will depend on the
setting of its Trigger Sync parameter.
On (checked): The trigger timing will be quantized to the
nearest beat relative to the base tempo.
Off (unchecked): If Trigger Mode is Start Immediately,
triggering will occur at the moment you press the DRUM
TRACK ON/OFF switch. If this is set to Wait KBD Trig,
triggering will occur at the moment you play the keyboard.
Synchronizing the drum track with the arpeggia-
tor function, Sequencer mode songs, patterns,
and RPPR performance
If you want the Drum Track pattern to play or be recorded in
synchronization with the currently-operating arpeggiator
function, currently-playing song, pattern, or RPPR
performance, turn Trigger Sync on.
Trigger Sync Off: If the Trigger Mode setting is Start
Immediately, the Drum Track pattern will be triggered the
moment you press the DRUM TRACK ON/OFF switch. If
this is set to Wait KBD Trig, the Drum Track pattern will be
triggered the moment you play the keyboard. It will not
synchronize to the currently-operating arpeggiator function
or to the currently-playing song, pattern, or RPPR.
Trigger Sync On: Triggering will synchronize to the
currently-playing song, pattern or RPPR performance at the
beginning of the next measure. Triggering will synchronize
to the currently-operating arpeggiator (in Sequencer mode if
the song or pattern is stopped) on the next beat.
Note: If you want to synchronize the arpeggiator to the
currently-running Drum Track function, set the Key Sync
parameter (Prog/Combi/Seq P7).
Note: If you want to synchronize the RPPR pattern
performance to the currently-running Drum Track function,
set the Sync parameter (Seq P10: Pattern/RPPR– RPPR
Setup page) to Beat or Measure.
Sync: Off
Sync: Beat
Sync: Measure
Key 1 on
Song
Key 2 on
Key 1 off
Sync settings
Patterns 1 and 2 are set to
Mode=Manual, and have
identical Sync settings
Pattern 1
Pattern 2
Pattern 1
Pattern 2
Pattern 1
Pattern 2
To Next Page
Loading...
