Sequencer mode
146
ARP
Arpeggio control lets you use the four knobs to control the
two arpeggiators in real time.
0–2–8b: Control Assign
Control Assign [Realtime Control, External, ARP]
This selects the items that will be controlled by the control
surface.
0–2–8e: Arpeggiator
The functions of knobs 1–4 are fixed. The knobs will control
the duration of the arpeggiated notes, their velocity, the
pitch range, and the length of the arpeggio pattern.
Knob 1: Gate [–64...+00...+64]
Adjusts the duration (gate time) of the arpeggiated notes
(See “Gate” on page 60).
Knob 2: Velocity [–64...+00...+64]
Adjusts the velocity of the arpeggiated notes (See “Velocity”
on page 60).
Knob 3: Length [–64...+00...+64]
Adjusts the length of the arpeggio pattern.
Knob 4: Octave [–64...+00...+64]
Adjusts the pitch range over which the arpeggiator will play,
in one-octave steps (See “Octave*” on page 59).
If Arpeggio Tone Mode is set to Fixed Note, operating
knob 4 will not affect the pitch range.
▼0–2–8: Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
•2: Rename Song ☞p.191
•3: Delete Song ☞p.191
•4: Copy From Song ☞p.191
•5: Load Template Song ☞p.191
•6: Save Template Song (Save as User Template
Song) ☞p.192
•7: FF/REW Speed ☞p.192
•8: Set Location (Set Location for Locate Key) ☞p.192
•9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
For more information, please see “Sequencer: Menu
Command” on page 191.
0–2
–8b
0–2
–8a
0–2
–8e
0–2
–8
Menu
To Next Page
Loading...
