Combination mode
104
5–1–3: –2 T01–08,
5–1–4: –2 T09–16
5–1–3(4)a: Combination Name, Tempo
5–1–3(4)b: Timbre Info
For more information, please see “2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16” on page 93.
5–1–3(4)c: MIDI Filter2
Timbre 01 (Timbre Number):
Enable JS X as AMS [Off, On]
Specifies whether or not MIDI pitch bend messages (the X
axis of the joystick) will be received to control the AMS effect
assigned to JS X. (This is not a filter for MIDI pitch bend
message reception.) For more information, please see
“Alternate Modulation Sources (AMS)” on page 373.
Enable JS+Y [Off, On]
Specifies whether MIDI CC#1 (the +Y axis of the joystick, or
a realtime control knob assign setting) will be transmitted
and received.
Enable JS–Y [Off, On]
Specifies whether MIDI CC#2 (the –Y axis of the joystick, or
a realtime control knob assign setting) will be transmitted
and received.
Enable Ribbon CC#16 [Off, On]
Specifies whether or not MIDI CC#16 (specified as the
assignment of a realtime control knob) will be transmitted or
received.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter2 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see “Timbre 01 (Timbre Number):,” above.
▼5–1–3(4): Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.73
•2: Copy from Program ☞p.120
For more information, please see “Combination: Menu
Command” on page 120.
5–1–5: –3 T01–08,
5–1–6: –3 T09–16
Here, you can specify whether the effect of knobs 1–4 (when
the CONTROL ASSIGN REALTIME CONTROL switch
saelection is Realtime Control A mode) will be transmitted
and received. The MIDI control messages assigned to knobs
1–4 when Realtime Control A mode is selected are fixed.
5–1–5(6)a: Combination Name, Tempo
5–1–5(6)b: Timbre Info
For more information, please see “2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16” on page 93.
5–1–5(6)c: MIDI Filter3
Timbre 01 (Timbre Number):
Enable Realtime Control Knob–1A [Off, On]
Enables or disables transmission and reception of MIDI
CC#74 (the M50’s filter cutoff frequency). This is assigned to
knob 1 when Realtime Control A mode is selected.
Enable Realtime Control Knob–2A [Off, On]
Enables or disables transmission and reception of MIDI
CC#71 (the M50’s filter resonance level). This is assigned to
knob 2 when Realtime Control A mode is selected.
Enable Realtime Control Knob–3A [Off, On]
Enables or disables transmission and reception of MIDI
CC#79 (the M50’s filter EG intensity). This is assigned to
knob 3 when Realtime Control A modeis selected.
Enable Realtime Control Knob–4A [Off, On]
Enables or disables transmission and reception of MIDI
CC#72 (the M50’s filter/amp EG release time). This is
assigned to knob 4 when Realtime Control A mode is
selected.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter3 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see “Timbre 01 (Timbre Number):,” above.
▼5–1–5(6): Menu Command
• 0: Write Combination ☞p.120
• 1: Exclusive Solo ☞p.73
•2: Copy from Program ☞p.120
For more information, please see “Combination: Menu
Command” on page 120.
5–1
–3a
5–1
–3
Menu
5–1
–3b
5–1
–3c
5–1
–5
Menu
5–1
–5a
5–1
–5b
5–1
–5c
To Next Page
Loading...
