1
Program mode
PROG Page Select
• Press the MODE PROG switch to select the Program
mode.
You can select Program mode pages in several ways.
1. Press the PAGE SELECT switch.
“Page Select” shows an abbreviated name for each page.
The page prior to pressing the PAGE SELECT switch is
shown in grey.
2. Select the desired page in the display.
Other ways to select pages
•Hold down the PAGE SELECT switch and press
numeric keys 0–9 to jump to the corresponding page.
For example, hold down the PAGE SELECT switch and
press numeric key 4 to jump to the P4: Amp/EQ page.
Note:
For pages that consist of multiple subpages, such
as P3–1 and P3–2, the first of these pages (P3–1) will be
selected.
• Press the EXIT switch to return to the most recently
selected Play page. Press the EXIT switch once again to
return to the Main page.
Page Main content
PLAY
P0: Play
Select and play programs. (
☞
p.2)
Oscillator and Drum track level settings.
(
☞
p.4)
Simple arpeggiator editing. (
☞
p.5)
Tone Adjust settings. (
☞
p.8)
Editing from the control surface. (
☞
p.11)
EDIT
P1: Basic/Ctrls
Basic program settings, such as voice assign
mode. (
☞
p.15)
SW1, 2, and knob settings. (
☞
p.18)
Chord trigger switch note and velocity
settings. (
☞
p.20)
P2: OSC/Pitch
Oscillator selection and pitch settings.
(
☞
p.21)
P3–1: Filter1 Filter 1 (tone) settings. (
☞
p.30)
P3–2: Filter2 Filter 2 (tone) settings. (
☞
p.40)
P4: Amp/EQ
Amp 1, 2 (volume) settings. (
☞
p.41)
Amp 1, 2 driver and pan settings. (
☞
p.47)
3-band parametric EQ settings. (
☞
p.47)
P5: LFO LFO settings. (
☞
p.48)
P6: AMS/Common
KeyTrack
AMS Mixer settings. (
☞
p.52)
Common keyboard tracking settings.
(
☞
p.58)
ARP & DRUM TRACK
P7: Arpeggiator/
Drum Track
Arpeggiator settings. (
☞
p.59)
Drum track settings. (
☞
p.62)
EFFECT
P8: IFX
Oscillator output bus and master effect send
level settings. (
☞
p.65)
Insert effect routing, selection, and settings.
(
☞
p.66)
P9: MFX/TFX
Master effect routing, selection, and settings.
(
☞
p.71)
Total effect selection and settings. (
☞
p.72)