Sequencer mode
162
5–1–5: –3 T01–08,
5–1–6: –3 T09–16
Here, you can specify whether the effect of knobs 1–4 when
the control surface REALTIME CONTROL switch has
selected Realtime Control A mode will be transmitted and
received. The MIDI control messages assigned to knobs 1–4
when Realtime Control A mode is selected are fixed.
5–1–5(6)a: Track Select, Tempo, RPPR
5–1–5(6)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 149.
5–1–5(6)c: MIDI Filter 3
Track 01 (Track Number):
Enable Realtime Control Knob–1A [Off, On]
Enables or disables reception of MIDI CC#74 (the M50’s
filter cutoff frequency), which is assigned to knob 1 when
Realtime Control A mode is selected.
Enable Realtime Control Knob–2A [Off, On]
Enables or disables reception of MIDI CC#71 (the M50’s
filter resonance level), which is assigned to knob 2 when
Realtime Control A mode is selected.
Enable Realtime Control Knob–3A [Off, On]
Enables or disables reception of MIDI CC#79 (the M50’s
filter EG intensity), which is assigned to knob 3 when
Realtime Control A mode is selected.
Enable Realtime Control Knob–4A [Off, On]
Enables or disables reception of MIDI CC#72 (the M50’s
filter/amp EG release time), which is assigned to knob 4
when Realtime Control A mode is selected.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 3 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):,” above.
▼5–1–5(6): Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
•2: Rename Song ☞p.191
•3: Delete Song ☞p.191
•4: Copy From Song ☞p.191
•5: Load Template Song ☞p.191
•6: Save Template Song (Save as User Template
Song) ☞p.192
•7: FF/REW Speed ☞p.192
•8: Set Location (Set Location for Locate Key) ☞p.192
•9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
For more information, please see “Sequencer: Menu
Command” on page 191.
5–1
–5c
5–1
–5b
5–1
–5a
5–1
–5
Menu
To Next Page
Loading...
