Effect Guide
366
159: BassTubeAmp+Cab.
(Bass Tube Amp Model + Cabinet)
This simulates a bass amp (with gain and drive) and speaker
cabinet.
a: Amp Type
i: Cabinet Type
Recommended Combinations of Bass Amp Models and
Cabinets:
Note: It is convenient to use the Effect Preset function to
preset your favorite pairings of amp model and cabinet.
(☞p.67)
160: St. Mic + PreAmp
(Stereo Mic Modeling + PreAmp)
This is a stereo mic and preamp simulator (see p.306, 025:
Mic Model+PreAmp (Mic Modeling + PreAmp)). For
example you might use this to simulate micing of a stereo
source such as a rotary speaker.
161: Multitap Cho/Delay
(Multitap Chorus/Delay)
This effect has six chorus blocks with different LFO phases.
You can produce a complex stereo image by setting a
different delay time and depth for each block. You can
control the delay output level via a modulation source.
aAmp Type
Selects the type of the amplifier
p.365
STUDIO
COMBO
A tube combo ideal for the
Motown sound
VOX AC100
A 100W tube amp AC100 made
by Vox
UK MAJOR
A 200W tube amp made in the
UK
bDrive Gain 0...100 Sets the input gain
c
Volume 0...100 Sets the output level
Src Off...Tempo
Selects the modulation source
for the output level
Amt –100...+100
Sets the modulation amount of
the output level
dBass 0...100 Sets the bass (low range) level
eMiddle 0...100
Sets the middle (mid range)
level
fTreble 0...100
Sets the treble (high range)
level
gPresence 0...100
Sets the presence (high-
frequency tone)
h
Cabinet
Simulator
Off, On
Switches the cabinet simulator
on/off
iCabinet Type
LA - 4x10,
MODERN -
4x10,
METAL - 4x10,
CLASSIC -8x10,
UK - 4x12,
STUDIO - 1x15,
JAZZ
- 1x15,
VOX AC100 -
2x15,
US - 2x15,
UK - 4x15,
LA - 1x18,
COMBI -
1x12 & 1x18
Selects the cabinet type
p.304, p.366
j
Wet/Dry
Dry,
1 : 99...99 : 1,
Wet
Sets the balance between the
effect and the dry input
Src Off...Tempo
Selects a modulation source for
Wet/Dry
Amt –100...+100
Sets the modulation amount
for Wet/Dry
Amp Type Cabinet Type
STUDIO COMBO STUDIO - 1x15
AC100 VOX AC100 - 2x15
UK MAJOR UK - 4x15, UK - 4x12
+
Left
Right
Wet / Dry
Volume
Drive
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
D
-mod
Bass Amp Model2
Cabinet Simulator
a
LFO
Frequency
[Hz]
0.02...13.00 Sets the speed of the LFO
b
Tap1 (000)
[msec]
0...2000
Sets the Tap1 (LFO phase=0
degrees) delay time
Depth 0...30 Sets the Tap1 chorus depth
Status
Always On,
Always Off,
On➝Off
(Dm),
Off➝On
(Dm)
Selects on, off, or modulation
source for the control of Tap1
output
p.367
c
Tap2 (180)
[msec]
0...2000
Sets the Tap2 (LFO phase=180
degrees) delay time
Depth 0...30 Sets the Tap2 chorus depth
Status
Always On,
Always Off,
On➝Off (Dm),
Off➝On (Dm)
Selects on, off, or modulation
source for the control of Tap2
output
p.367
d
Tap3 (060)
[msec]
0...2000
Sets the Tap3 (LFO phase=60
degrees) delay time
Depth 0...30 Sets the Tap3 chorus depth
Status
Always On,
Always Off,
On➝Off
(Dm),
Off➝On
(Dm)
Selects on, off, or modulation
source for the control of Tap3
output
p.367
Tube Pre AmpMic Simulation
Tube Pre AmpMic Simulation
Left
Right
Wet / Dry
Output Level
Wet / Dry
Stereo In - Stereo Out
Left
Right
Feedback
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
+
LFO: Triangle
0 [degree]
180 [degree]
60 [degree]
240 [degree]
120 [degree]
300 [degree]
Tap1 Delay
Tap2 Delay
Tap3 Delay
Tap5 Delay
Tap6 Delay
Tap4 Delay
D
-mod
On/Off Control
Panning Preset
To Next Page
Loading...
