PROG P9: MFX/TFX (Master/Total Effect) 9–2: MFX1
71
TFX On/Off [Off, On]
This turns total effect on/off. If this is off, the input will be
passed directly through. The setting will alternate between
on/off each time you press this.
Alternatively, you can send control change #95 to turn
the total effect off. A value of 0 turns the total effect off,
and values of 1–127 restore the original setting. The
global MIDI channel specified by MIDI Channel
(Global 1–1a) is used for this message.
9–1c: Master Volume
Master Volume [000...127]
This specifies the final level of the audio output that has
passed through total effect, and output from AUDIO
OUTPUT L/MONO and R.
▼9–1: Menu Command
• 0: Write Program ☞p.73
• 1: Exclusive Solo ☞p.73
•2: Copy Insert Effect ☞p.76
•3: Swap Insert Effect ☞p.76
• 4: Write FX Preset ☞p.77
For more information, please see “Program: Menu
Command” on page 73.
9–2: MFX1
9–2a: MFX1
Here you can edit the parameters of the effect you choose for
MFX1 in the P9: MFX/TFX– Routing page.
Effect dynamic modulation (Dmod) is controlled on the
global MIDI Channel (Global 1–1a). For more
information, please see “Dynamic Modulation Source
List” on page 380.
MFX1 On/Off [Off, On]
This turns master effect 1 on/off. It is linked with the on/off
setting in the P9: MFX/TFX– Routing page.
The setting will alternate between On and Off each time you
press this.
Alternatively, you can use CC#94 to turn Master effects
1/2 off. CC#95 will turn the Total effect off. A value of 0
is Off, and a value of 1–127 selects the original setting.
This is controlled on the global MIDI channel specified
by MIDI Channel (Global 1–1a).
P (Effect Preset)
[P00, P01...15, U00...15, ---------------]
This selects the effect preset. For more information, please
see “P (Effect Preset)” on page 67.
MFX1 Parameters
Here, you can edit the parameters of the master effect
selected in the P9: MFX/TFX– Routing page.
For details on the master effects, please see “Master Effects
(MFX1, 2)” on page 281.
▼9–2: Menu Command
• 0: Write Program ☞p.73
• 1: Exclusive Solo ☞p.73
• 2: Copy Insert Effect ☞p.76
• 3: Swap Insert Effect ☞p.76
• 4: Write FX Preset ☞p.77
For more information, please see “Program: Menu
Command” on page 73.
9–2a
9–2
Menu
To Next Page
Loading...
