Sequencer mode
164
SEQ P5–2: MIDI Filter 2
5–2–1: –5 T01–08,
5–2–2: –5 T09–16
5–2–1(2)a: Track Select, Tempo, RPPR
5–2–1(2)b: Track Info
For more information, please see “2–1: Trim T01–08, 2–2:
Trim T09–16” on page 149.
5–2–1(2)c: MIDI Filter
Track 01 (Track Number):
Enable SW1 [Off, On]
Enable SW2 [Off, On]
Specifies whether or not the effect of the SW1 and SW2
switches will be received.
SW1 and SW2 are controlled by the SW1 and SW2 switches.
The function of these switches is specified in the P1:
Controllers– Controllers Setup page.
These settings are valid if these keys are assigned to SW1
Mod. (CC#80), SW2 Mod. (CC#81), or Portamento SW
(CC#65).
Enable Foot Switch [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
SWITCH will be received. The function is assigned in Global
P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Enable Foot Pedal [Off, On]
Specifies whether or not the effect of the ASSIGNABLE
PEDAL will be received. The function is assigned in Global
P2: Controllers– Foot Controllers page.
This filter setting is valid when a MIDI control change is
assigned.
Track 02...08, 09...16 (Track Number):
These are the MIDI Filter 5 settings for MIDI tracks 2–8 and
9–16. They are the same as for track 1. For more information,
please see “Track 01 (Track Number):,” above.
▼5–2–1(2): Menu Command
• 0: Memory Status ☞p.191
• 1: Exclusive Solo ☞p.73
•2: Rename Song ☞p.191
•3: Delete Song ☞p.191
•4: Copy From Song ☞p.191
•5: Load Template Song ☞p.191
•6: Save Template Song (Save as User Template
Song) ☞p.192
•7: FF/REW Speed ☞p.192
•8: Set Location (Set Location for Locate Key) ☞p.192
•9: GM Initialize ☞p.193
• 10: Copy From Combi (Copy from
Combination) ☞p.194
• 11: Copy from Program ☞p.195
For more information, please see “Sequencer: Menu
Command” on page 191.
5–2
–1c
5–2
–1b
5–2
–1a
5–2
–1
Menu
To Next Page
Loading...
Need help?
General
