Combination mode
80
COMBI P0: Play
This is the main page of Combination mode. Among other
things, you can:
• Select combinations
• Select a program for each timbre, and specify its Play/
Mute and Solo On/Off status.
• Edit the Arpeggiator in simple ways
•Use the Tone Adjust function to make simple edits for
program parameters
•Check the control surface content, and operate it.
Tip: Auto Song Setup
The Auto Song Setup feature copies the current Program or
Combination into a Song, and then puts the M50 in record-
ready mode.
If inspiration for a phrase or song strikes you while you’re
playing, you can use this function to start recording
immediately. To do so:
1. Hold down the ENTER switch and press the
SEQUENCER REC/WRITE switch.
The Setup to Record dialog box will open and ask “Are you
sure?”
2. Press OK.
You will automatically enter Sequencer mode, and will be in
the record-ready state.
3. Press the START/STOP switch to start the sequencer
and begin recording.
For more information, please see “Tip: Auto Song Setup” on
page 126.
0–1: Program T01–08,
0–2: Program T09–16
This is the main page for selecting and playing
Combinations. You can also set the Program, Play/Mute,
and Solo On/Off for each of the Timbres 1–8 and 9–16.
For more information, please see “0–1: Program T01–08, 0–2:
Program T09–16” on page 80.
0–1(2)a: Combination Select
Bank [A...D]
This indicates the currently selected combination bank.
Press one of the COMBI BANK A–D switches to select the
desired bank.
• Each bank contains rewritable combination program
areas for 128 combinations (a total of 1,792).
Note: Pressing one of the PROG BANK A–G switches while
the Program Select parameter is selected will change the
timbre program bank (rather than the combination bank).
Combination Select [000...127]
Here you can select the desired Combination.
To switch combinations
• Choose “Combination Select,” use numeric keys 0–9 to
input the desired combination number, and press the
ENTER switch.
• Choose “Combination Select” and turn the VALUE dial
or use the q/u switches.
Note: On this page only, the VALUE slider functions as a
modulation source - which means that you cannot use it
to select combinations.
• If the “0–1a: Combination Select” parameter is selected,
the PROG BANK A–D switches will switch combination
banks.
• From the Bank/Combination Select menu you can view
and select combinations by bank.
• From the Category/Combination Select menu you can
view and select combinations by category.
• You can use a foot switch to select combinations. For
more information, please see the Global parameter “Foot
Switch Assign” on page 228. For a list of the functions
that can be assigned to the footswitch, please see “Foot
Switch Assignments” on page 384.
• You can transmit MIDI program changes from a
connected external MIDI device.
Bank/Combination Select menu:
1. Press the popup button located at the left of “Combina-
tion Select” to access the Bank/Combination Select
menu.
2. Press one of the tabs at left or right to select a bank.
3. Select a combination from the list. You can directly
press your choice within the list, or use the qq
qq
/uu
uu
switches.
If the screen cannot display all of the available items, use the
scroll bar.
0–1a
0–1b
0–1
Menu
Bank No. Description
A, B, C 000…127 Preloaded combinations
D 000…127 User combinations
Bank
Combination Select Popup Combination Select
Category Popup Tempo
To Next Page
Loading...
