Korg microKORG2 - MIDI Filter

microKORG 2 - GLOBAL, CONTROL, MIC, MIDI, MIDI FILTER
86
1 Press the EDIT GLOBAL button to access the MIDI page.
2 Use knob 4 to set Clock Source (ClockSrc) to “Internal”. This makes the microKORG2 transmit
MIDI timing clocks.
3 Configure your external MIDI device to receive MIDI clock data.
This makes your external MIDI device (such as a sequencer or rhythm machine) operate at the
tempo you specify using the Tempo parameter on the EDIT ARP A page.
Setting an external MIDI device as the controller and the microKORG2 as the follower
Connect the microKORG2’s MIDI IN connector to your external MIDI device’s MIDI OUT connector, or
connect the USB ports of both devices.
1 Press the EDIT GLOBAL button to access the MIDI page.
2 Use knob 4 to set Clock Source (ClockSrc) to “External MIDI” or “External USB”.
This makes the microKORG2 receive MIDI timing clocks from your external MIDI device.
3 Configure your external MIDI device to transmit MIDI clock data.
The arpeggiator on the microKORG2 now operates in time with the tempo of the external MIDI
device (such as a sequencer or rhythm machine).
When Clock Source (ClockSrc) on the EDIT MIDI page is set to “Auto” and a MIDI clock is received from
either an external MIDI device connected to the MIDI IN connector of the microKORG2 or a device like
a computer that’s connected to the USB port on the microKORG2, the microKORG2 automatically
works in “External MIDI” or “External USB” mode. Otherwise, the microKORG2 works in “Internal”
mode.
Tip: See the Owner’s Manual of your external MIDI device for details on synchronization-related set-
tings for external MIDI devices.
| MIDI FILTER
These settings determine whether each type of MIDI data is transmitted and received.
1. Program Change (ProgChg) [Disable, Enable]
Sets whether program changes are transmitted and received.
Disable: Program change messages are not transmitted or received.
Enable: Program change messages are transmitted and received.
2. Control Change (CC) [Disable, Enable]
Sets whether MIDI control change messages are transmitted and received.
Disable: MIDI control change messages are not transmitted or received.
Enable: MIDI control change messages are transmitted and received.