Korg microKORG2 - Mixer, Filter; Mixer

microKORG2 TIMBRE EDIT section - MIXER, FILTER
61
MIXER, FILTER
| MIXER
This adjusts the volume balance between oscillators 1–3 and the noise generator.
These settings are the input levels to the filter.
1. OSC 1 Level (OSC1 Lvl) [0...127] (CC#23)
Sets the output level of oscillator 1.
2. OSC 2 Level (OSC2 Lvl) [0...127] (CC#24)
Sets the output level of oscillator 2.
3. OSC 3 Level (OSC3 Lvl) [0...127] (CC#25)
Sets the output level of oscillator 3.
4. Noise Level (Noise Lvl) [0...127] (CC#26)
Sets the output level of the noise generator.