Korg microKORG2 - Arp A, B; Arp a

Keystage EDIT section - ARP A, B
76
ARP A, B
| ARP A
1. Tempo [30...300]
This sets the tempo at which the arpeggiator plays.
This setting also affects the loop recorder playback speed, the LFO and the various effect parameters.
The knob changes the value in steps of two if the value is set to 270 or greater. Use the INC/DEC but-
tons to change the value in steps of one.
Note: If the global MIDI Clock Source is set to “External USB/MIDI”, or if it is set to “Auto” when there is
an external input, this tempo setting is ignored and the instrument synchronizes to the external MIDI
clock.
2. Swing [-100%...0...+100%] NRPN 0, 5
Specifies the percentage (%) by which even-numbered notes of the arpeggio are shifted in timing rel-
ative to the first note.
3. Resolution [1/32, 1/24, 1/16, 1/12, 1/8, 1/6, 1/4] (NRPN 0, 6)
Sets the resolution (intervals between the notes) relative to the specified tempo.
1/32: The arpeggio plays as thirty-second notes of the specified tempo.
1/24: The arpeggio plays as sixteenth note triplets of the specified tempo.
1/16: The arpeggio plays as sixteenth notes of the specified tempo.
1/12: The arpeggio plays as eighth note triplets of the specified tempo.
1/8: The arpeggio plays as eighth notes of the specified tempo.
1/6: The arpeggio plays as quarter note triplets of the specified tempo.
1/4: The arpeggio plays as quarter notes of the specified tempo.