Korg microKORG2 - Writing a Program

microKORG2 Writing data (saving) - Writing a program
46
Writing a program
Settings that are saved
• All parameters for TIMBRE MIX, TIMBRE EDIT and EDIT ARP A, B
• All parameters for VOCAL PROCESSOR, EFFECT and EQ
• ARPEGGIATOR ON/OFF, TEMPO
• VOCAL PROCESSOR (SETTING), EFFECT (ROUTING), EQ ON/OFF
•OCTAVE SHIFT UP, DOWN
1 Press the WRITE (FUNCTION 4) button.
The FUNCTION 4 button LED blinks, and the BANK and PROGRAM NUMBER LEDs blink.
2 Use the PROGRAM SELECT dial, the BANK button and the PROGRAM NUMBER buttons 1–8 to
select the save destination program number.
Press the CANCEL (FUNCTION 5) button to cancel.
Tip: The USER bank contains initialized programs by factory default. Select a save destination if
you don’t want to overwrite the existing program.
3 Name the program. Move the cursor using the CUR < (FUNCTION 1) and CUR > (FUNCTION 2)
buttons, use the EDIT CONTROL 1–4 knobs to select the character, and use knob 5 to select the
background color.
4 Press the EXECUTE (FUNCTION 4) button to save the data.
Press the CANCEL (FUNCTION 5) button if you wish to cancel.
After the data is saved, the microKORG2 returns to its normal operating state.