Korg microKORG2 - Updating the System

microKORG2 Appendices - Updating the system
125
Updating the system
1 Download the latest software from the https://www.korg.com/microkorg2_driver/ website.
2 Connect the USB port on the microKORG2 to your computer with a USB cable.
3 Press the power button while pressing the FUNCTION 3 button on the microKORG2.
4 Copy the update file that you downloaded from the KORG website to the “UPDATE” folder on the
USB drive that’s shown on your computer.
Note: If you’re connected to a Mac, first eject the “microkorg2” USB drive on your Mac and then
perform the operations on the microKORG2.
5 Press the FUNCTION 4 button to update the system.
6 Once the message “COMPLETE: PLEASE REBOOT” appears, long-press the power button to turn
off the power, and press it again to restart the instrument.