microKORG2 Appendices - Restoring the factory settings
126
Restoring the factory settings
This shows you how to restore the program and global data settings on the microKORG2 to their
default values (factory reset).
1 Press the power button while holding down the FUNCTION 2 button.
“FACTORY RESET” is shown.
2 Press the buttons corresponding to the items you want to initialize, and perform the reset.
FUNCTION 1 (PROGs) button: resets all program settings
FUNCTION 2 (GLOBAL) button: resets the global settings
FUNCTION 3 (LOOP REC) button: resets the loop recorder settings
FUNCTION 4 button (ALL): resets all settings
FUNCTION 5 button (CANCEL): cancels the factory reset
The instrument starts up normally once the reset is completed.
Once you’ve performed a factory reset, any existing data on the microKORG2 is overwritten
with the factory default settings. Check whether it’s all right to overwrite the data before
you do this.
Don’t touch the knobs, the keyboard or any other controls on this instrument while the data
is being reset. Never turn off the power while the factory reset is in progress.
To Next Page
Loading...
