Korg microKORG2 - Display; Home Page

microKORG2 Part names - Display
18
Display
| Home page
• Press the FUNCTION 5 button to show the home page.
Status
MIC: Indicates the input signal detected for the MIC CONDENSER and DYNAMIC jacks.
Black: no sound; green: input detected; red: input overload
AUX: Indicates the input signal detected for the AUX IN jack.
Black: no sound; green: input detected; red: input overload
LOOP: Indicates the recording length for the loop recorder.
BPM: tempo
Power: Hi, Low, Alert, Empty, Now Measuring
Shows the remaining battery power in steps.
: when using an AC adapter
Program
Shows the currently selected program number, name, genre and bank.
PROGRAM NUMBER
Program Name
Genre
BANK
→ Selecting programs
Performance Edit
Use the EDIT CONTROL knobs 1 through 5 to make changes to the parameters assigned to each knob
while you’re playing, which alters the sound. → Using Performance Edit to modify the sound
Functions
The various functions that the FUNCTION 1–5 buttons can perform.
INC, DEC: Increases or decreases the value of the parameter that’s being edited, one step at a time.
Use the EDIT CONTROL 1–5 knobs to select the parameter for which you want to change the value.
Tip: Turn the EDIT CONTROL 1–5 knobs while holding down the FUNCTION 5 button to select a parame-
ter without changing the values.
MIC AUX LOOP BPM POWER
No.
Name
Genre
BANK
Performance
Edit
Parameter
Function
Program
Value