microKORG2 TIMBRE section - TIMBRE
49
TIMBRE
|
TIMBRE
Select either timbre 1 or 2 to edit.
• Press the TIMBRE button to switch between timbres (either LED 1 or LED 2 lights up).
Note:
Switching between timbres is available when Timbre Mode in VOICE is “Dual”. You can’t switch
between timbres in Single mode.
|
TIMBRE MIX
This adjusts the volume and panpot of the two timbres.
• Long-press the TIMBRE button to show these settings (the button blinks).
Timbre1 Level (Timb1 Lvl) [0...127]
Adjusts the volume of timbre 1.
Timbre1 Pan (Timb1 Pan) [L63...L1, Center, R1...R63]
Adjusts the panpot of timbre 1.
Timbre2 Level (Timb2 Lvl) [0...127]
Adjusts the volume of timbre 2.
Note:
This is enabled when Timbre Mode is set to “Dual”.
Timbre2 Pan (Timb2 Pan) [L63...L1, Center, R1...R63]
Adjusts the panpot of timbre 2.
Note:
This is enabled when Timbre Mode is set to “Dual”.
To Next Page
Loading...
