Global page |107
English
▪ If you connected a volume/expression pedal, push it all the way forward to
its maximum position.
When you have finished calibrating the pedal connected to the PEDAL 2
jack, FAVORITES button #2 will turn on.
6 Finally calibrate the DAMPER pedal. Completely depress the pedal, then
release it. When you have finished calibrating the pedal connected to the
DAMPER jack, FAVORITES button #3 will turn on.
7 When finished calibrating:
▪ If you calibrated all three pedals connected, SV-2 automatically exits calibra-
tion mode.
▪ If you calibrated only one or two pedals, click the Stop Calibration button in
the Pedal Calibration Mode dialog to exit calibration mode.
To Next Page
Loading...
