34| The Piano
Advanced settings
The advanced settings buttons
The group of buttons named TRANSPOSE, LOCAL OFF, TOUCH and
FUNCTION give access to a series of advanced features that you may need
to adapt the piano to your habits.
Adjusting the master tune
You can fine tune the instrument, to adapt to another instrument that can-
not be tuned.
1 Press the FUNCTION button.
After you press this button, its LED starts blinking. Also, one of the LEDs
around the INTENSITY knob in the PRE FX section starts blinking.
2 Use the INTENSITY knob to edit master tuning. By default, the SV-2 is tuned
to the standard Western tuning (A = 440Hz). Use the INTENSITY knob to
change this, by lowering or raising the pitch. The LEDs around the knob show
the nearest value of the pitch detuning.
3 To reset tuning to the original A = 440Hz, press the INTENSITY knob.
To Next Page
Loading...
Need help?
General
