Korg SV-2 User Manual

Playing the sounds |19
English
Selecting the factory sounds
How to select a sound
The SOUND section is where you can select the factory sounds.
1 Use the TYPE knob of the SOUND section to select a base type of sound
(one of six).
2 Use the VARIATION knob of the SOUND section to select one of the varia-
tions of the base sound (one of six). Notice that the LED next to the knobs
lights up to show the selected sound and variation.
3 Press the VARIATION knob to select the second bank of variations (the LED
color will change to green). Use the same VARIATION knob to select one of
the variations in the second bank (one of six).
4 When you want to return to the first bank of variations, press the VARIATION
knob again (the LED color will return orange again).

Korg SV-2 Specifications

General

Polyphony	128 voices
Sound Engine	PCM
Keyboard	88-key RH3 (Real Weighted Hammer Action 3)
Effects	Reverb, Delay, Chorus, EQ, Amp Simulator
Amplifier	Built-in stereo amplifier
Connections	MIDI In/Out, USB
Power Supply	AC adapter (included)