Using the effects |27
English
Editing the effects
Equalizer
Use the three knobs of the EQUALIZER section to access the three-band
equalizer and adjust the overall tonal characteristics of the sound coming
from the SV-2. To reset an EQ band to the original value, press the corre-
sponding knob.
1 Use the three EQUALIZER knobs to adjust the low, mid and high frequencies.
2 After having changed a knob position, you can return to the original settings
by pressing the corresponding knob.
WARNING: Extreme EQ settings may produce a very loud signal.
Pre FX
The SV-2 includes a stompbox simulator, that recreates the sound of a pedal
effect inserted before the amplifier’s input. Use the PRE FX section to select
one of the six pedal effect models the SV-2 offers. Pedal effects are connect-
ed before the amp.
1 Use the TYPE knob of the PRE FX section to select a different stompbox
effect (compressor, booster, U-Vibe, vibrato, tremolo or wah).
2 You can change the speed of the modulation of the U-Vibe or tremolo ef-
fects by using the SPEED knob, and the intensity of the modulation by using
To Next Page
Loading...
