72| The Editor
Editing a User tuning curve
You can edit each tuning curve, and save the edited curve into either of the
two available User locations. User tuning curves can then be reached from
the Curve list in the side drawer.
1 Select a tuning curve to edit from the pop-up menu on the left of the key-
board diagram (as seen above).
2 Click a key to be edited on the keyboard (or choose it from the Note pop-up
menu).
3 Use the Tune knob to change the note tuning. The note variation is made
in cents with this knob, and the resulting pitch is shown in Hertz (Hz) In the
Frequency field.
4 Repeat the above for each note you want to edit.
5 Click the Store button to save the changes. The Save Tuning Curve dialog
appears:
Choose a User location, and assign it a name. Then click OK to confirm sav-
ing, or Cancel to exit the save procedure without saving.
At the end, the new tuning curve will appear in the Curve list in the side
drawer.
6 If you want to delete all the changes and return to the Equal Temperament,
click the Reset button.
To Next Page
Loading...
Need help?
General
