FX page |87
English
Choosing a Cabinet model
Click the name of the selected Cabinet model, then choose a different item
from the list.
Tweed – 1x12
This speaker is the other half of our Tweed amp. As the name suggests it is a
single 12” speaker, uses an Alnico magnet and made in the USA by one of the
US’s revered names in vintage loudspeakers.
Parameters Values Notes
Power Att 0…100 This is a power attenuator, and sets the level of the power
amp. Changing it also influences the sound’s character.
NR Sens 0…100 Adjusts the noise reduction level.
Tweed – 4x10
Keeping with the US made Alnico magnet speakers, this cabinet partnered
our Twin amp. It is an open backed cab using four 10” 8 Ohm speakers, wired
in parallel for a total of 2 Ohms impedance. Although originally intended for
bass guitar, this speaker rocks for many different styles.
For illustration and parameter’s description, please refer to Tweed – 1x12.
To Next Page
Loading...
Need help?
General
