Appendix page 109
V Technical data
Weight 21 kg
Dimensions (W x D X H) 300 x 390 x 585 mm
Power supply 85-264 V AC (40-60Hz)
Power consumption (standby) ca. 4 W
Power consumption (during
measurement)
max. 40 W
Resolution, density 0.001 g/cm
3
Measuring range, density 0 – 2.30 g/cm
3
Measuring range SFT/IFT 0 – 999,9 mN/m
Measuring range, density 1-2200 kg/m
3
Probe density 2.330 g/cm
3
Resolution SFT/IFT 0.01 mN/m
Resolution, density 1 kg/m
3
Stage speed 0,1 - 500 mm/min
Stirrer function oscillating
Stirrer speed 2.0-10.0 /s
maximum load of the force
sensor
120 g
VI Warranty and caveat emptor
The warranty terms and deadlines are described in the general terms and conditions of
KRÜSS GmbH.
There is no warranty claim if the product was damaged due to careless usage or
improper treatment or if it was not used according to purpose, and if the instructions
and danger warnings in the manual were not observed.
The warranty claim is void if changes on the product are performed by the customer or
a third party without prior consultation of KRÜSS GmbH, which go beyond the activities
described in the manual. This also applies to repair work, which was independently
performed or carried out by a third party.
To Next Page
Loading...
Need help?
General
